Laser uncoated transfer paper for hard surface

Posted on 2021-06-21 16:18:16


Laser uncoated paper


This is a transfer paper that can be directly transferred to objects without a transferable layer. Because the sublimation transfer paper must be transferred to a object with a layer, we also call this paper smart paper. It must be transferred to objects without layers. It is generally transferred to plastics, glass, aluminum plates, ceramic tiles, metal plates and other objects, and cannot be used on fabrics.


The printer should choose a color laser printer, set the mirror mode when printing, and choose label paper for the paper type. After printing the pattern, the side with the pattern should be close to the substrate and fixed with high temperature tape. The pattern must be smaller than the substrate. Use a baking cup machine for transfer, set the temperature and time to 180 degrees, 80 seconds, and adjust the pressure to medium. After the transfer is completed, wait for the object to cool down before tearing off the transfer paper. The transfer effect is best. Other flat objects can be transferred using a heat press machine after printing, and the temperature time is set to 180 degrees, 200 seconds.


This paper also has a special paper called special effect laser uncoated transfer paper, which is divided into two styles of gold and silver. It is also a transfer paper used on objects without layers. The printer can choose a black and white laser printer, and it is also a mirror printing mode. The paper type is label paper. The pattern should face the substrate during transfer. Use high temperature tape to fix the circumference and middle of the transfer paper on the cup, and then wrap a piece of 1 -2mm thick silicone cushion, put it into the baking cup machine, set the temperature and time to 180 degrees, 180 seconds, take out the cup after the transfer is over, wait for the cup to cool, put it in the dryer and bake for 5 minutes, and set the temperature to 220 degrees. You can put the transferred cup in water to speed up the cooling. After the cup is transferred, a little powder may remain. This is only a process effect. You can directly wipe it off with paper. Be sure to wipe the edges clean before drying, so that the pattern can be better reinforced.


Welcome your inquiry!








Address: C211 ,Building 100 ,No.2891,Qilianshan Nan Rd Pu Tuo District,Shanghai China



  • Username cannot be empty
  • Email cannot be empty
  • Phone cannot be empty
  • Message cannot be empty