Posted on 2021-01-29 09:34:14
Tattoo Sticker/Body Sticker
- The tattoo sticker is composed of two parts: a laser tattoo sticker and a tattoo sticker transfer film. It is a water transfer type, suitable for color laser printing.
- Take the HP color laser printer as an example. Before printing, select the image for mirror printing, and select "Label" or "Thick Paper" as the paper type (recommended paper above 175g)
- Trim the tattoo paper without leaving the pattern part. Tear off the release film of the tattoo film. The tattoo film and the pattern of the tattoo paper are closely attached. You can use a scraper (normal plastic card) to connect the tattoo film to the tattoo. The paper is compacted to make the two fit more closely
- The pattern is cut to a suitable size, the film on the tattoo film is gently peeled off, and the transfer paper pattern is tightly attached to the skin (you can gently press the bottom paper with your hand to make the pattern fully contact the skin)
- Wet the bottom paper of the transfer paper with water to make the bottom paper fully moist, then slowly remove the bottom paper to complete the tattoo sticker transfer
- Pat the pattern with your hand after transfer to make the pattern fit firmly to the skin and increase the firmness of the transfer
- When the tattoo film and the tattoo paper are pasted together, the two should be tightly attached to prevent air bubbles between them. The two can be compacted with a scraper.
- When transferring the pattern to the skin, it must be compacted by hand to prevent bubbles in the middle. If there are bubbles, the pattern will be easily damaged and affect the transfer effect.
- After the transfer, the pattern surface has a sticky feeling. It is recommended not to touch the pattern or wash it with water. The pattern can be kept for 2 days
SHANGHAI VISION DIGITAL PRINTING CO., LTD.
Address: C211 ,Building 100 ,No.2891,Qilianshan Nan Rd Pu Tuo District,Shanghai China